Reading 205/55 R16 91V
- 205 is the nominal tyre width in millimetres.
- 55 is the aspect ratio. The sidewall height is 55% of the nominal tyre width.
- R means radial construction. 16 is the wheel rim diameter in inches.
- 91 is the load index. It is a code for the load capacity of one tyre under specified conditions.
- V is the speed rating. It describes the tyre’s tested speed capability under specified conditions.
Find the placard and check both axles
The placard is often on the driver’s door frame. If it is elsewhere, the owner’s manual can help you locate it. Look for tyre sizes, load or speed requirements and recommended inflation pressures. Check the front and rear wheels separately, as some cars use different sizes on each axle.
If you see XL, LT, C or a run-flat marking, include it exactly as printed. Tell the fitter if the wheels are aftermarket, if the vehicle tows or carries heavy loads, or if the current size differs from the placard. A shared rim diameter alone does not establish suitability.
What to send for an accurate quote
If a marking is hard to read, leave the size field blank and ask for help. Check the vehicle only when it is parked safely. For an alternative size on a modified vehicle, ask for a fitment assessment against the manufacturer’s requirements and applicable Victorian rules before ordering.
- Vehicle make, model, year and variant if known.
- Full sidewall code, including load index and speed rating, plus front and rear sizes if different.
- Number of tyres, which axle they are for and any preference for a particular brand or pattern.